51
Shiki Ryougi / Re: A Guide to 63214C, by Darcius
« on: August 19, 2009, 07:22:42 PM »
correct me if i'm wrong but isn't using this attack the equivalent of saying PLEASE SHIELD BUNKER ME
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
ahaha that's no--wait, what?
52
Shiki Ryougi / Re: C-Ryougi Thoughts Without a Thread
« on: August 19, 2009, 06:46:04 PM »
If I knew how to get fraps working with pcsx2 i'd record it.
EDIT: google-fu is a powerful tool
http://www.youtube.com/watch?v=ZvX5kDKgLbQ
EDIT: google-fu is a powerful tool
http://www.youtube.com/watch?v=ZvX5kDKgLbQ
53
Shiki Ryougi / Re: Ryougi combo thread
« on: August 19, 2009, 06:44:54 PM »
For C-Ryougi, 2B 5C 236B 236B 236B 5B 5C j.BC j.BC airthrow. Does 4.3k meterless, you can get a tiny bit more damage (and make the combo harder) by substituting 2B for 5BB in the beginning. Afaik, her best meterless. Note that the B rekka to 5B link is fairly difficult, I think the timing is around the same tightness as MBAC Arc relaunch.
http://www.youtube.com/watch?v=ZvX5kDKgLbQ
http://www.youtube.com/watch?v=ZvX5kDKgLbQ
54
Melty Blood Auditorium / Re: How to run Melty Blood Actress Again on your PC
« on: August 19, 2009, 06:40:35 PM »For Linux you may want to try ZZogl video plugin. I say "may" because I haven't tried it myself. Your Mileage May Vary (tm)
http://forums.pcsx2.net/thread-4108.html <- ZZogl Main Thread Here
I am going to try for a good GSdx config sometime this week. Also, for that first Audio Plugin, you will need to tweak the latency regardless of how good your system is. Default delay is like 150ms or something (kinda high). You want to get it as low as possible without pops/weirdness.
It may say that, but it felt a lot closer to the big 1000ms, in other words around a second.
55
Shiki Ryougi / Re: H-Ryougi Thoughts Without a Thread
« on: August 19, 2009, 02:54:00 PM »
h-ryougi thoughts: "why aren't you playing crescent instead"
56
Shiki Ryougi / Re: C-Ryougi Thoughts Without a Thread
« on: August 19, 2009, 02:01:18 PM »
Swapping 5BB with 2B makes it easier to connect but it's still situational.
57
Melty Blood Auditorium / Re: How to run Melty Blood Actress Again on your PC
« on: August 19, 2009, 11:23:49 AM »
"Video" section updated, everyone should double check it.
58
Melty Blood Auditorium / Re: How to run Melty Blood Actress Again on your PC
« on: August 19, 2009, 11:14:44 AM »It is the same for me but when i jump or dash the char is streching like hell :/
That's the interlacing. You can turn it off to fix that but you'll get crazy tearing.
59
Melty Blood Auditorium / Re: How to run Melty Blood Actress Again on your PC
« on: August 19, 2009, 10:43:28 AM »That artifact effect looks like the same thing MBAC had when you had Antialiasing on. Try turning it off?
~M
I couldn't even find an option for antialiasing in gsdx configuration, and I don't have it turned on in my graphics card drivers.
60
Melty Blood Auditorium / How to run Melty Blood Actress Again on your PC (with Netplay)
« on: August 19, 2009, 10:37:20 AM »
Alright, before we get started I want to make one thing clear. Do NOT discuss piracy in this thread. As far as this thread is concerned, this is a place for discussing how to play your legally-bought copy of MBAA on an emulator with a legally-dumped BIOS that you dumped from your own PS2. Emulation by itself is not illegal and (I hope) doesn't break any forum rules.
Well, obviously, first off you'll want to know if your PC is good enough to run MBAA. And my answer to that is "I dunno, lol". Your best bet is to simply try it and see for yourself. Since the emulator is just a tiny download and you have your MBAA disc sitting right there, there's no harm in at least trying, right?
Once you've downloaded PCSX2 from here, you'll want to start it up. Point it at the bios file that you legally dumped from the PS2 you already own, and get stuck into those nitty gritty config screens.
You have three choices for video. The first choice, the Gsdx thing, will give you the best speed and highest performance graphics, and is somewhat tweakable. However there's a price you pay for speed, and it's minor artifacting onscreen. For an example, check these images:
http://i27.tinypic.com/2e30ah2.jpg http://i30.tinypic.com/335crps.jpg
It's not as bad as it looks in still images, but it's definitely noticable. I played MBAA like this for hours without caring, and only decided to mess around and try to fix it when I decided to take a break. So it's not a huge deal.
The second option is here. http://pcsx2.dyndns.org/index.php#GSdx Here is an updated version of Gsdx. Make sure your directX is updated to the latest version (march 2009) and make sure you download the C++ thing at the top of that page. This Will fix the sprite artifacts as long as you set it up properly (see below(thanks daimao!))
Set "resolution" to however big you want the window to be. This is just stretching, and should not effect performance. MBAC PC default window size was 640x480, for reference.
The third choice, ZeroGS, is much more customisable, allows for antialiasing and other cool stuff, and it will fix the sprite problems.
When using either Video plugin, you should configure settings for interlacing as per your preferences. Turning it on will result in lines across the screen, turning it off will result in the screen "tearing" - you can probably spot some tearing in the two screenshots above. It's up to you. Pick your poison. Gsdx blur interlacing looks far far better than anything zeroGS has.
For sound, you have three choices. The top choice will give you the absolute nicest quality sound, however it will be somewhat desynced from the video, in my experience (your mileage may vary). Test it and see.
The second choice will give you audio that is perfectly synced, but sounds garbled and messed up, and won't play music properly. Obviously i don't reccomend it.
The Third choice is a happy balance between the two. It sounds pretty decent and is slightly desynced, but it isn't majorly noticable. I reccomend the third option here for most people, but again it depends on your machine. Set it up like this:
If anyone finds a way to get perfect audio in PCSX2, please tell me and I'll update the thread.
Lastly, make sure to click "configure" on your CDDVD-ROM plugin, and set it to the drive that you will bemounting inserting your MBAA disc into, or else you won't get anywhere. You'll also need to configure your controls, but surely you don't need a walkthrough for that.
Speed Hacks - If you are running an older computer or are having any kind of issues, mess around in this screen.
As you can see, I do not have any speedhacks available. This is because I don't waste all my money on bad japanese cartoons, ugly figurines, or subpar quality fighting games, and thus I can afford a real computer. If you are less fortunate, experiment with these options until you get MB running at a solid 60fps. Only change one option at a time, that way, if something breaks, you know how to fix it.
One last thing. If your MBAA is actually running too fast, you can limit the framerate in config > cpu. Thanks to Zelretch for this.
That's about it. Keep in mind these are the settings I use on my machine (AMD 6000+, 8800GTS 512, 2GB ram) and they may not work for everyone. Please try and put some effort in by testing different settings before posting in this thread whining that "it doesn't work". I have little tolerance for people who can't help themselves.
AND DON'T TALK ABOUT PIRACY YOU STUPID FUCKS HOLY SHIT THIS THREAD IS FOR TALKING ABOUT PLAYING YOUR LEGAL COPIES OF MBAA ON THE PC SO THAT YOU CAN USE PC-COMPATIBLE PADS/STICKS/KEYBOARDS FOR PLAYING IT
Well, obviously, first off you'll want to know if your PC is good enough to run MBAA. And my answer to that is "I dunno, lol". Your best bet is to simply try it and see for yourself. Since the emulator is just a tiny download and you have your MBAA disc sitting right there, there's no harm in at least trying, right?
Once you've downloaded PCSX2 from here, you'll want to start it up. Point it at the bios file that you legally dumped from the PS2 you already own, and get stuck into those nitty gritty config screens.
You have three choices for video. The first choice, the Gsdx thing, will give you the best speed and highest performance graphics, and is somewhat tweakable. However there's a price you pay for speed, and it's minor artifacting onscreen. For an example, check these images:
http://i27.tinypic.com/2e30ah2.jpg http://i30.tinypic.com/335crps.jpg
It's not as bad as it looks in still images, but it's definitely noticable. I played MBAA like this for hours without caring, and only decided to mess around and try to fix it when I decided to take a break. So it's not a huge deal.
The second option is here. http://pcsx2.dyndns.org/index.php#GSdx Here is an updated version of Gsdx. Make sure your directX is updated to the latest version (march 2009) and make sure you download the C++ thing at the top of that page. This Will fix the sprite artifacts as long as you set it up properly (see below(thanks daimao!))
Set "resolution" to however big you want the window to be. This is just stretching, and should not effect performance. MBAC PC default window size was 640x480, for reference.
The third choice, ZeroGS, is much more customisable, allows for antialiasing and other cool stuff, and it will fix the sprite problems.
When using either Video plugin, you should configure settings for interlacing as per your preferences. Turning it on will result in lines across the screen, turning it off will result in the screen "tearing" - you can probably spot some tearing in the two screenshots above. It's up to you. Pick your poison. Gsdx blur interlacing looks far far better than anything zeroGS has.
Quote
FYI, if you hold triangle+cross once the render window comes up, pick the top option twice to use progressive mode. This way, you don't have to use the render plugin's deinterlacer, which makes it look quite pretty (no scanlines or blurriness)Thanks mrthefter!
For sound, you have three choices. The top choice will give you the absolute nicest quality sound, however it will be somewhat desynced from the video, in my experience (your mileage may vary). Test it and see.
The second choice will give you audio that is perfectly synced, but sounds garbled and messed up, and won't play music properly. Obviously i don't reccomend it.
The Third choice is a happy balance between the two. It sounds pretty decent and is slightly desynced, but it isn't majorly noticable. I reccomend the third option here for most people, but again it depends on your machine. Set it up like this:
If anyone finds a way to get perfect audio in PCSX2, please tell me and I'll update the thread.
Lastly, make sure to click "configure" on your CDDVD-ROM plugin, and set it to the drive that you will be
Speed Hacks - If you are running an older computer or are having any kind of issues, mess around in this screen.
As you can see, I do not have any speedhacks available. This is because I don't waste all my money on bad japanese cartoons, ugly figurines, or subpar quality fighting games, and thus I can afford a real computer. If you are less fortunate, experiment with these options until you get MB running at a solid 60fps. Only change one option at a time, that way, if something breaks, you know how to fix it.
One last thing. If your MBAA is actually running too fast, you can limit the framerate in config > cpu. Thanks to Zelretch for this.
That's about it. Keep in mind these are the settings I use on my machine (AMD 6000+, 8800GTS 512, 2GB ram) and they may not work for everyone. Please try and put some effort in by testing different settings before posting in this thread whining that "it doesn't work". I have little tolerance for people who can't help themselves.
AND DON'T TALK ABOUT PIRACY YOU STUPID FUCKS HOLY SHIT THIS THREAD IS FOR TALKING ABOUT PLAYING YOUR LEGAL COPIES OF MBAA ON THE PC SO THAT YOU CAN USE PC-COMPATIBLE PADS/STICKS/KEYBOARDS FOR PLAYING IT
61
Shiki Ryougi / Re: C-Ryougi Thoughts Without a Thread
« on: August 19, 2009, 10:07:42 AM »
As far as I know, this is her most damaging meterless combo.
2A 5BB 5C 236B 236B 236B 5B 5C j.BC j.BC
Adding a 236C onto the end will only give you an extra 300 dmg or so. I'm still doing tests but this is the best damage I've got so far.
2A 5BB 5C 236B 236B 236B 5B 5C j.BC j.BC
Adding a 236C onto the end will only give you an extra 300 dmg or so. I'm still doing tests but this is the best damage I've got so far.
63
Tournaments and Events / Re: Interest Check for Mini AM
« on: August 12, 2009, 11:35:54 AM »
>bellreisa
>melty
does not compute
>melty
does not compute
64
Kohaku's Video Room / Re: Hitler discovers the shocking truth about Blazblue
« on: June 26, 2009, 07:16:00 PM »You deserve it for planning to main v-13 anyway
i played it at the arcade and she was the most fun character
65
Kohaku's Video Room / Hitler discovers the shocking truth about Blazblue
« on: June 25, 2009, 06:18:23 PM »66
Kohaku's Video Room / Re: WARUI NE
« on: May 27, 2009, 09:03:23 AM »Contributing to the awesome thread,
http://www.youtube.com/watch?v=gAJ424SnoLk
this guy has a really good singing voice but its painfully obvious hes trying to keep as quiet as possible which kind of ruins it
67
Kohaku's Video Room / Re: [WTFH]mbac bug and unique combocollection
« on: May 10, 2009, 09:06:53 AM »that's really old
http://www.youtube.com/watch?v=PyWblcK7Hn0
the more interesting fact is that len can't die from that damage
Isn't it because Len's orb absorbs some hits and only a few hits hit Len?
no, a lot of moves in the game are set up that you can only be killed by the final hit. for example get someone's HP down to 1, then throw them with someone who has a multi-hit throw. they won't die until the last hit. the hits before that are set such that they aren't able to kill someone. the same goes for hiero, it doesn't kill until the final hit, and if that final hit never comes out, len doesn't die
68
Kohaku's Video Room / Re: BANANA SHIKI - THE LEGEND
« on: May 04, 2009, 09:23:44 AM »
seems like it carries heavier hitstun than MBAC nanaya's version. Would like to see how it compares to H-Nanaya's.
69
Kohaku's Magical Garage / Re: Looking for a bit of help...
« on: May 04, 2009, 09:04:02 AM »
there are plenty of solo kohaku players and solo kohaku was buffed in AA, i see no reason for not going solo if you prefer it as a player.
70
Shiki Nanaya / Re: OFFICIAL Nanaya MBAA Guide
« on: May 01, 2009, 07:25:26 AM »Well, in all fairness. This thread was made before Tohno got toned down in v.a. He was complete bullshit in vanilla.
tbh i think you can say this for every melty blood game released so far
71
Melty Blood Auditorium / Re: MBAA Tiers
« on: May 01, 2009, 07:22:47 AM »
irysa your trolling is much more effective when you dont put any effort into it
72
Melty Blood Auditorium / Re: MBAA Tiers
« on: April 29, 2009, 03:56:04 AM »Did C-Nanaya get changed in ver.A? When MBAA first came out all the american nanaya players were crying about how his 2B and 5C were nerfed and he sucks horribly now. So was he buffed in ver.A or is this another classic case of american players being wrong about everything?
Maybe it's because I don't hang out in any of the IRC channels or I'm watching some different matches than you guys, but when was ANYONE complaining about Nanaya being nerfed? LOL sucking horribly now....really? I could have sworn he was doing perfectly from the matches I was seeing.
when MBAA first came out i was getting hype over c-nanaya's buffed 5B and how its really useful and several people (including jiyuna and magikarp and some others i think) proceeded to lecture me about how his 2B and 5C have been super nerfed and hes a lot worse now and etc etc etc
but like i said this was back when it was first released, maybe it changed for ver.A?
73
Melty Blood Auditorium / Re: MBAA Wiki
« on: April 29, 2009, 03:54:37 AM »
the strongest nanaya in europe will lend a hand to your cause
when the game gets console release
when the game gets console release
75
Shiki Nanaya / Re: OFFICIAL Nanaya MBAA Guide
« on: April 29, 2009, 03:52:07 AM »
c-nanaya is high tier
japan agreed, dont bother them about it
japan agreed, dont bother them about it